Smart Presence Sensor
WAITINGLIVE PRESENCE
WAITING FOR DATA
Connecting to sensor…
ConnectionConnecting…
Last detection—
DEVICE · TZ-SENSOR-01 · GPIO14
TOOZLY / COMMAND CENTER
Your space, under control.
Connected devices, live presence and future automations — in one place.
CONNECTING
RGB Light 01
WAITING FOR DEVICECOLOR PREVIEW
OFF
Waiting for a fresh device update
RGB buttons are enabled. Cloud connection is required to send commands.
DEVICE · RGB-01 · 1 LIGHT / 3 COLORS
Motion Sensor
WAITINGLIVE MOTION · PIR
WAITING FOR DATA
Waiting for the new sensor…
Last detection observed—
Last update received—
Motion activity
Waiting for motion updates…
DEVICE · TZ-PIR-01 · GPIO33
Temperature & Humidity
WAITINGTEMPERATURE
— °CHUMIDITY
— %Waiting for a fresh sensor reading…
Last update received—
DEVICE · TZ-DHT-01 · DHT11 · GPIO32
MQ-2 Gas & Smoke Sensor
WAITINGRAW SENSOR READING
— / 4095Waiting for a fresh MQ-2 reading…
Last reading received—
ESP32 ALARM THRESHOLD—Waiting for ESP32
BUZZER UNKNOWNWaiting for ESP32 confirmation…
The buzzer follows the real sensor reading. Threshold controls stay usable while awaiting confirmation. Three samples confirm each change (about 1–1.5 seconds after the command arrives). It stops 50 counts below the chosen threshold (minimum 0).
Uncalibrated raw reading · not PPM or a safety alarm. Readings can drift while the sensor warms up.
DEVICE · TZ-GAS-01 · MQ-2 · GPIO34
DC Motor Studio
WAITINGLIVE DRIVE STATE
WAITING FOR DEVICE
Connecting to ESP32…
CONFIRMED PWM—0%
TIME LEFT—
CYCLE PROGRESS—
Motion tools
Timed run
Short jog
A 0.25-second pulse for a small movement.
Cycle demo
Smooth motion
Waiting for live ESP32 confirmation.
Speed is the commanded PWM output, not measured RPM. Low settings may not start this motor. Direction changes include a 0.2-second stop. Closing or hiding this page stops your run; lost contact stops it within approximately 3 seconds.
TZ-MOTOR-01 · IBT-2 · D16 / D17
Activity feed
Waiting for live events…
Device library
Smart Presence SensorTZ-SENSOR-01
—RGB Light ControllerTZ-RGB-01
—PIR Motion SensorTZ-PIR-01 · GPIO33
WAITINGTemperature & HumidityTZ-DHT-01 · GPIO32
WAITINGMQ-2 Gas & Smoke SensorTZ-GAS-01 · GPIO34
WAITINGDC Motor StudioTZ-MOTOR-01 · D16 / D17
WAITINGPresence sensor is live. RGB commands enabled; the light must be online.